Bunn Ultra-2 Main Control Board BRAND NEW FROM BUNN 38710.1000, 44039.1000 p

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Bunn Ultra-2 Main Control Board BRAND NEW FROM BUNN 38710.1000, 44039.1000 p:
$374.00

FACTORY FRESH NEW STYLE MAIN CIRCUIT BOARD FOR BUNN ULTRA-2

44039.1000 (New Part Number)

38710.1000 (Replaces This Old Part Number)

FREE PRIORITY SHIPPING - ARRIVES IN 2 OR 3 DAYS DIRECT FROM MARGARITA GUYS

These areBRAND NEW FROM BUNNMain Control Circuit Board Assembliles for any Bunn Ultra-2machine and will replace either P/N 38710.1000 or 44039.1000.The 37810.1000 part numberis for theolderboard that also requires a separate Memory Board (aka \"TIC\" Board). New part number44039.1000contains its own time/memory circuitry on the board (look at upper left corner with yellow circle) and there is no need for a separate TIC board.The newboard is listed in the new parts manual but will still be shown as the older number in the older parts books.If you have any Ultra-2 machine, this is the correct main control board that will work in it (the 44039.1000 will directly replace the 38710.1000 board).This board will also work with auto-fill machines which require an additional sub-board to be added onto this board (sub-board not included with this purchase). If you have a 44039.1000 board, you must replace it with another 44039.1000 board.

Instructions from Bunn give you the option totransfer the data in the memory on your TIC Board to this new Main Board electronically or simply replace the Main Board and remove the TIC Board, then program the new board. The intructions even give you a sheet where youwrite down the data stored on the TIC Board for easymanual entry into the new Main Board (and to keep as a back up).

PLEASE READ THIS BEFORE PURCHASING THIS COMPONENT: Unless you are absolutely sure you need this component, we highly recommend you callour techniciansbefore purchasing. One hopper not freezing, one auger not turning, or both hoppers cooling but not freezing are not necessarily control board problems. The main control board is the machine\'s \"computer\" that receives inputs from sensors and sends out orders to operating components, and you should eliminate the potential for poor or damaged sensor input (e.g. torque sensor boards, membrane switches, thermistors, plugs, wiring) and problems with operating components before buying this main control board.

The list price of this part from Bunn is$444 plus shipping (you save $56 plus shipping costs). Priority Shipping means you should receive this board in two or three working days after payment is received. Unlike other vendors, we do not \"Drop Ship\", these boards are on our shelf and go straight out to you the same business day as we receive payment. Drop shipping means your seller will place an order with Bunn to have the board sent to you from Bunn -- it will take an extra week to get to you if it is drop shipped (but it saves the seller the money to stock the board). Because of the price of these boards, few vendors stock them like we do.

We prefer Paypal for payment and also accept Mastercard, Visa, Discover and American Express -- check the \"Seller\'s Payment Instructions\" in the Shipping and Payments tab for more payment information. Shipping is via Priority Mail with tracking. Ask us about other CDS or Ultra parts you may need -- remember we\'ll provide the support you need to diagnose your problem and to install the parts we sell.

Check out out other CDS parts and tools at our store: Margarita Guys Store!

To see all of our helpful Service Guides maintained here on designed to help you understand, diagnose problems, and run your machine with the fewest problems, click here.

Note: This component (circuit board) could be permanently damaged the moment it is plugged in and energized if your machine has damaged or non-functioning electrical components, damaged wiring, or electrical shorts. You should fully troubleshoot and resolve other electrical/electronic problems before installing this part. Do not buy this board to use as adiagnostic tool expecting to return it -- this part canot be returned (please see our Return Policy).