RM Italy HLA 305v HF Professional Linear amplifier (FCC ID: 2ACTRHLA305V)

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

RM Italy HLA 305v HF Professional Linear amplifier (FCC ID: 2ACTRHLA305V):
$755.00

RM Italy HLA 305V Plus Professional Linear AmplifierThe New RM Italy HLA 305v HF Amplifier got approved by FCC, FCC ID: 2ACTRHLA305V1.8 MHz – 26 MHz and 28 MHz – 30 MHz. (160m to 10 m)Larger Heat Sink.More linear input circuit.More powerful processor.LCD Display.Redesigned RF stage.Bias Circuit.Faster RX/TX SwitchingImproved Filtering.
The new RM Italy HLA 305 V (with ventilator) is a Wideband compact Amplifier for the HF band covering from 1.8 MHz – 26 MHz and 28 MHz – 30 MHz.

The HLA-305v operates from 1.8 MHz – 26 MHz and 28 MHz – 30 MHz. and its output power is 250W, with an input power of 1-10 Watt. There are 6 filters built-in to suppress harmonics, which are switched automatically but can also be switched manually for special operating conditions.

At the front panel there is a switchable input attenuator as well as a LC-display which can show input power, output power, heat sink temperature or output SWR. The intensity of the background light is adjustable. The CPU monitors input power, temperature and VSWR. Any error status are saved so that the manufacturer or authorised reseller can read them out for diagnose purposes. The PA has a PTT input (use for SSB recommended), but also a built-in HF-VOX.

For optimal heat distribution the PA transistors are mounted on a large copper heat spreader (200x60x3mm). The HLA-305v has an oversized heatsink and therefore remains cool during operation.

For operation the PA requires 13.5V at max. 34A, dimensions are about 240x420x70mm and weight 4,3 Kg.

The DC cable is is nominal 250W at Full Power.

6 Band filter and LCD for Amplifier Status.

Input drive from 1W to maximum of 10W.

Ideally suited to Low Power handheld Transceivers.

Forced multispeed ventilation.

Frequency: 1.8 MHz – 26 MHz and 28 MHz – 30 MHz

Mode: AM FM SSB CW RTTY.

RF Drive: 1-10 W typ. (15W max). AM/CW

Output Power: P1db 50-240W AM/FM/CW ± 1db typ. max

250W max. AM/FM/CW/SSB Average power

Gain: 13,5 ± 1db P1db.

Power Voltage: 13 Vcc ± 2V.

Input Power: 45 A Max.

Input Impedence: 50 Ohm (unbalanced).

Output Impedence: 50 Ohm (unbalanced).

Final Transister: MRF 455 x 4.

Circuit: Class AB push-pull.

Dimensions: 240 x70x 450 mm.Weight: 4 Kg.